Click on the image to download our Hunters Edition Background
for your computer!!!!
The following features come standard on all models.
* Tilt back with Hydraulic Shocks, Rear Cargo Box.
* Driver and Passenger Seat Belts.
* Huge 7.6 gallon tank for hours and hours of riding.
* Plenty of O/S Handles.
* ELECTRONIC FUEL INJECTION!!!
* Super-Grab All Terrain Tires, 10” Front, 8” Rear.
* Solid Steel Front Bumper with Plastic Guard.
* 99% of Yamaha 660 Rhino Parts will fit this unit.
* 12 volt Accessory outlet in Dash.
* Full Unit Bottom Skid Plate.
* Heat Shield and Insulated Wires throughout the Unit.
* Removable seats with Drivers Seat Under Storage.
* Comes with Center Console w/ Cup Holders
|Hunters Edition Unit Includes the following|
|2,500 lbs Winch with wired remote control.|
|Heavy Duty Molded Swing Doors with Locking Feature.|
|MOOSE MOUNTED/REMOVABLE SPOTLIGHT|
|SAFARI UNDERHOOD SUPPORT RACK|
|MOOSE CARGO BED NET|
|CAMO NEOPRENE SEAT COVERS & HEADRESTS|
|GUN CASE UTV RT HARDWOOD|
|SAFARI ALUMINUM HOODRACK |
|MOOSE CAB HEATER|
|CAMO 6PK ROLLBAR COOLER|
|CAMO STORAGE POUCH ABOVE HEAD MOUNT|
|27" ITP MUDDER TIRES (UPGRADED FROM 25")|
|SS BLACKED ALUMINUM WHEELS|
|CAMO FULL CAB ENCLOSURE|
Engine: Just like the Yamaha, this Yamaha Cloned Engine puts out 500cc with all the power you need to climb mountains and outrun your buddies. This SOHC 4 valve head puts out a 9.2:1 Compression Ratio and is Liquid, Oil, and Air Cooled w/ Fan providing maximum cooling in the Texas Heat. The Low/High engine option lets you really choose how you want to distribute the power of the engine. The low gives you a great bottom end that can really pull you up the mountain and the high lets you have that all out go when you want maximum speed and railing power. The front and rear Shaft drive is a great low maintenance system that delivers solid response and power all the time. The 3 way Differential Lock 4x4 System is superior to most units on the market today.
EFI!!!!: This unit is now EFI!!! Electronic Fuel Injection!!! A huge step up of power from the carb units! It does not rely on air to drive the power of the unit, but instead it has an electronic injector and directly injects the fuel straight into the intake that goes to the motor. No more changing jets at high altitude or cleaning a carb!! This is by far the best way to go and has way more direct drive power over the carb units!
Chassis: The Rhino Replica Steel Frame is just as light weight as the Yamaha while still providing maximum durability.
Suspension: Both the 500 and 700 give you 12 inches of ground clearance with their Front and Rear Double Independent Wishbone Suspension System providing for the best ride you could ask for.
Electrical: There is a 2,500 lbs Winch included on this Unit. The battery is a maintenance free battery that is continually charged via the alternator. The lights feature high and low beams while the indigo backlit digital display unit has the Speedometer, Tachometer, Odometer, Fuel Gauge, 4WD Status, transmission position, and clock.
Towing: The center mounted receiver hitch can be fitted for towing up to 1500 lbs. This unit was fitted with strong suspension to with stand a bigger payload and heavier towing capacity while still providing a smooth ride.
Here is all the FREE STUFF you get when you buy a powersports vehicle from us!
1. Free Shipping on almost all vehicles!
2. Free Residential Delivery. (Most places make you pick up at the shipping terminal)
3. Free Liftgate Service at delivery. (Except Small Dirt Bikes and Small ATVS)
4. Free 3 Month Manufacture Warranty! Click here for full details.
5. Free Lifetime Tech Support from our Certified MMI Mechanics. (Most companies offer free tech support but not from REAL Mechanics)
6. Free Tool Kits. (Included with Most Vehicles)
7. Free Owner's Manual.
8. Free MCO for vehicle registration.
||2011 500cc UTV
||2011 Yamaha 450cc Rhino|
||Liquid Cooled, 4 Stroke, SOHC
||Yamaha Liquid Cooled, 4 Stroke, SOHC|
||2WD, Limited Slip 4WD, 4WD Differential Lock
||2WD, Limited Slip 4WD, 4WD Differential Lock|
||EFI - FUEL INJECTION
||Yamaha Fuel Injection YFI, 41mm|
||32 Bit ECU|
|| V-Belt (L/H/N/R)
||Yamaha Ultramatic V-Belt (H/L/N/R)|
||F/R Independent Double Wishbone, 6.9" Travel
||F/R Independent Double Wishbone, 7.3" Travel|
||Dual Hydraulic disk
||Dual Hydraulic disk, Twin Piston|
||Hydraulic disk, Shaft Mounted
||Hydraulic disk, self adjusting, Shaft Mounted|
||3 Month Limited Factory Warranty
||6 Month Limited Factory Warranty|
Ground Clearance: 12.5
Minimum Turning Radius: 157.4
Engine Type: Single Cylinder, Water cooled
Starting System: Electric Start
Size, Front: 25×8-12
Size, Rear: 25×10-12
Front: Hydraulic Disc brake
Rear: Hydraulic Disc brake
Type: Independent dual cross arms
Shock Absorber: Independent dual cross arms
2nd Review by Killer Motorsports Owner Mike Smith
"This UTV is one of kind and will ONLY be found at Killer Motorsports, if found anywhere else then its just an imitation and BEWARE!!! It has been said that I have designed some of the most innovative products in this industry but I have to say, this has been the coolest project I have worked on yet. We sell more UTVs than anyone in this industry and SOOO many of our customers were asking our staff if we had upgrades because they hunt. Finally our staff asked me to design a UTV that would be ready to roll for hunters. So then began the "Hunters Edition", it has everything short of a Deer GPS Finder, but maybe we'll do that next! I sat down with a bunch of different hunters and asked what are hunters biggest issues while hunting. I would hear things like, it's wet, cold, hard to store things, get stuck, etc. So in short, we replaced the factory tires with ITP SS Blacked Wheels w/ 27" Mudder Tires, a Full Camo Enclosure, Camo Double Gun Rack w/ Extra Storage Pouches, Interior above your head Camo Storage Pouch, Interior Heater, Mounted/Removable Spotlight, 6 Soda Camo Cooler Holder Pack, Front Storage Hood Rack, Rear Bed Cargo Net, Camo Seat Covers, and Camo Headrest Covers. Truly, the most complete Hunters Ready UTV ever conceived!!"
1st Review by Killer Motorsports Owner Mike Smith
For me to bring UTVs into my company and start selling them was a pretty…. Awkward… process. I knew we had been needing to get into the UTV side of the powersports business for years but no one ever could give me something that was impressive. Plus add to the fact that I personally drive a “pimped out” Yamaha 700 Rhino, the bar is set pretty high when I look at the “Chinese stuff”. The whole process got kicked off last year when a guy from Two Brothers Performance came by my both at the Indy Show and introduced himself. I didn’t really pay attention because they were bringing in UTVs and I figured I had seen everything coming out of China. Finally around mid year of 08 I pulled his card out and found out his headquarters was about 30 minutes from my dealership, so I headed on over to check out there stuff. When I got there they had one of their 700cc UTVS waiting for me to take out for a spin. I looked over their UTV and asked if it was a modified Rhino since it looked almost identical to my personal Rhino. They said it was their 700 and I was honestly blown away. Their stock Rhino had features that were standard that I had to buy for my Rhino from Yamaha when I picked it up stock. Features like the center console, winch, roof, aluminum wheels, massive tires, etc. All the little things you don’t really think you need that become a necessity after a while. I took it out and immediately took it straight to a ditch in the middle of the main road to see if the 4 wheel drive could get me out of the muck. Sure enough, the 4x4 lock did the trick and got me out. The guys were not so happy when I got back that they had a gross muddy test unit but I’m sure they didn’t care since I bought up some inventory from them that day. The next day I had my entire staff show up early and help put one of the 700s together so I could take off to Rocky Ridge in Decatur, Tx. I took off around lunch on Friday and by the time I got back the next Monday I had put that UTV through HELL! Mostly what I wanted to see is if I could break anything, see what upgrades our customers would want, see how everything would hold up, and I must say the UTV came back a champ! Nothing broke, no overheating, 4x4 worked awesome, tranny was solid, everything held up well and I had a great time testing out the unit. This unit is now EFI!!! Electronic Fuel Injection!!! A huge step up of power from the carb units! It does not rely on air to drive the power of the unit, but instead it has an electronic injector and directly injects the fuel straight into the intake that goes to the motor. No more changing jets at high altitude or cleaning a carb!! This is by far the best way to go and has way more direct drive power over the carb units!
All orders over $99 dollars get Free Shipping!
All units are PDI/Tuned before shipping. We open each box, check to make sure everything is there, start the unit to make sure it starts and tune the unit to make sure the idle is set right.
When we get your order we process ASAP! Not within 5 days like most companies! Once the order is processed we usually ship it within 24 hours! Not within 3 days like most companies!
We work with 4 different shipping LTL carriers to get you the fastest shipping time possible. Most shipping times for vehicle products average 3-4 days from pickup to delivery for Business Addresses and 4-5 days for Residential Addresses once shipped.
We ship to Residential Addresses for free! Most companies charge for this! We offer FREE Lift gate Service! Most companies charge for this! (Lift gate not included for Dirt/Pit Bikes or Small ATVS) If you would like a shipping quote to AK or HI just give us a call.